Also referred to as the consumer unit, the fuse box is the unit from where your mobile home’s electricity is distributed and controlled. In the case of an emergency and you need to shut the entire supply of electricity in your mobile home, or during a crucial electric repair troubleshooting, the fuse box is where you do this from. It may not seem really important at first, but it is imperative that as a wise owner of a tiny home, you know a few things about the fuse boxes for some reasons that this article will reveal. Below is some crucial breaker box information along with some handy tips you should grasp about mobile home fuse boxes.
Mobile Home Fuse Boxes – Main Components
In general, a fuse box is supposed to contain three main components. These are the main switch, the circuit breakers/fuses, and the RCDs.
1) The Main Switch: Just like the name suggests, the main switch is a feature that allows you to turn your home’s electricity supply on or off. However, a mobile home can have several main switches depending on the electrical appliances or electrical systems it has. When there is more than one main switch, your mobile home will most likely have more than one fuse box as well.
2) Circuit Breakers: The other components of a fuse box are circuit breakers. A fuse or a circuit breaker does exactly what the name suggests. Their role is to switch an electric current off whenever a fault is detected. Circuit breakers are similar in both size and function to switches but are designed to provide more protection. The difference is that while a fuse can blow and call the need for replacement, circuit breakers will just trip and require you to only reset the switch. However, the fault should always be rectified before the circuit breaker switch is reset.
3) Fuses: Some fuse boxes come with fuses instead of circuit breakers. A fuse disconnects an electric current when there is a fault or an overload of current. It does so with the help of a wire located in between two screws in the fuse. This wire quickly melts down during the fault, thereby discontinuing the flow of electric current.
4) RCDs: These are also known as residual current devices, which are switches designed to instantly disconnect electricity by tripping a circuit during dangerous conditions. RCDs switch electricity off automatically when a dangerous fault is detected, therefore, reducing the risk of damage or injury from electrocution.
Handy Fuse Box Tips for Mobile Home Owners
1. Know Where It’s Located:
This is actually huge safety tip for any mobile home owner. It is important to know where your circuit breaker/fuse box is positioned. Additionally, it is important to note whether it is the fuse type or the circuit breaker type. For the fuse type, you will normally see small glass tube structures with metallic ends. For the circuit breaker type, on the other hand, you will note toggle-like switches inside the box.
2. When the Lights Go Off:
An electric fault can easily cause a blackout in your entire mobile home. In this case, you will find that either the lights’ circuit or all the circuits tripped due to the fault and if your breaker uses fuse, one or more fuses may have blown, especially the one controlling the faulty circuit. It is always important to keep a flashlight near your circuit breaker or fuse box just in case you need to check the component out during the blackout. Having an extra set of fuses around can also be advisable, just in case an incident occurs and replacements are required. In the latter case, however, it’s important to note that different fuses have different amperages, so be sure to note this before purchasing the extra set.
3. When A Fuse Blows Or Breaker Trips:
When a fuse blows, the wisest thing is to unplug any devices or appliances first from the faulty circuit. Of course, this will always require replacement, which should be done with your main switch on the fuse box off. Blown fuses are mostly cloudy or broken and should always be replaced with one of similar/ equivalent amperage. If your fuse box is the modern breaker type, you only need to reset the circuit breaker using the switch without the need to turn the main switch off. However, be sure to unplug your devices from the tripped line first and turn the switch completely off before flipping it back on again.
The above are just but a few of the many tips about mobile home fuse boxes you should know of. Understanding these can increase your convenience, safety, and reliability of your electric appliances and components.
Mobile Home Fuse Boxes – Recommendations
1: Cooper Bussmann Cartridge Fuse – F 20 Amp (10 box)
Buy From: mobilehomedepotmi.com
2: Siemens Single Pole Twin Circuit Breaker
Buy From: mobilehomepartsstore.com